ESI RQ Bridge Crestron Home ™ driver

$150.00

Crestron home will communicate with the ESI RQ Bridge hardware via Serial communication. The RQ Bridge drivers connect with the RQ Bridge IPToSerial driver via IP and not to the hardware directly.

Please make sure to read below the full description of the driver before purchasing.

 

Description

The RQ Bridge driver is used to control the shades available in a room. There should be one or more instances of the driver in each room with shades control. Multiple driver instances can be added to different rooms, and they will be presented as multiple tiles on the user interface.

Note: Due to the nature of this product, any and all sales are final, and NO refund will be issued. It is highly recommended and encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor.

Before calling, review the Driver help file and FAQ section for the Driver as our support is limited to questions about configuration and setup only. Any hardware configuration mentioned in the driver manual are the responsibility of the integrator. If you have hardware-related questions, such as wiring or addressing, we advise reaching out directly to the manufacturer for assistance. Additional support, beyond driver configuration, requires the purchase of service hours before guidance will be provided.

We reserve the right to make changes to this policy without notice.

Reviews

There are no reviews yet.

Be the first to review “ESI RQ Bridge Crestron Home ™ driver”

Your email address will not be published. Required fields are marked *

Downloads

ESI RQ Bridge Driver Manual

  • What preparation do I need to do before installing the driver?

    It is recommended that you save a configuration or golden configuration before installing any driver.

  • All search results