Key Digital KD-IP922 AV Switcher Crestron Home™ Driver

Description

Outputs

16x HDMI
16x Audio

Inputs

16x HDMI

Updated inputs and outputs to use generic connectors.

Note: Due to the nature of this product, any and all sales are final, and NO refund will be issued. It is highly recommended and encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor.

Before calling, review the Driver help file and FAQ section for the Driver as our support is limited to questions about configuration and setup only. Any hardware configuration mentioned in the driver manual are the responsibility of the integrator. If you have hardware-related questions, such as wiring or addressing, we advise reaching out directly to the manufacturer for assistance. Additional support, beyond driver configuration, requires the purchase of service hours before guidance will be provided.

We reserve the right to make changes to this policy without notice.

Reviews

There are no reviews yet.

Be the first to review “Key Digital KD-IP922 AV Switcher Crestron Home™ Driver”

Downloads

AVSwitcher_KeyDigital_IP-Manual

It is recommended that you save a configuration or golden configuration before installing any driver.

Crestron Home manages input loop-outs using virtual adapters. The adapters are placed in the Crestron Home configuration as a hub between the source and the devices. The physical source is landed on the adapter’s input, and the adapter outputs are landed on the device's input as needed. The most commonly used adapters are the Universal A/V Adapter and the Uncontrolled Generic A/V DA. They are shown under the "Other" category below "Drivers".