Nexus21 Apex Crestron Home ™ Driver


The Nexus21 Apex driver communicates with the lift over IP. After the driver is implemented, Crestron Home™ will be able to control the lift, and save and recall position presets. All the commands are available as Sequences on the Quick Actions sections on the Crestron Home™ setup app.

Please make sure to read below the full description of the driver before purchasing.


All the needed lift commands can be added to the Media Zone Off, Media Zone On, Or Media Zone Sleep events.

Supported Features and Commands
– In
– Out
– Left Swivel
– Right Swivel
– Stop
– Save
– Home
– Preset 1
– Preset 2
– Preset 3
– Setup

Note: Due to the nature of this product, any and all sales are final, and NO refund will be issued. It is highly recommended and encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor.

Before calling, review the Driver help file and FAQ section for the Driver as our support is limited to questions about configuration and setup only. Any hardware configuration mentioned in the driver manual are the responsibility of the integrator. If you have hardware-related questions, such as wiring or addressing, we advise reaching out directly to the manufacturer for assistance. Additional support, beyond driver configuration, requires the purchase of service hours before guidance will be provided.

We reserve the right to make changes to this policy without notice.


There are no reviews yet.

Be the first to review “Nexus21 Apex Crestron Home ™ Driver”

Your email address will not be published. Required fields are marked *



  • What preparation do I need to do before installing the driver?

    It is recommended that you save a configuration or golden configuration before installing any driver.

  • All search results