Wattbox Crestron Home™ driver

$100.00

This Crestron Home™ driver manages communications to the Wattbox via TCP/IP. You will be able to control the power status of the outlets on the Wattbox.

This driver currently doesn’t support the models WB-300, WB-300VB, WB-700, WB-700CH.

Note: Due to the nature of this product, any and all sales are final, and no refund can be issued. It is highly recommended and highly encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor. We reserve the right to make changes to this policy without notice.

Description

  • Will control Wattbox series that support telnet.

  • Current known supported series are: WB-150, WB-250, and WB-800.

  • Username and password can not contain special characters, only alphanumeric characters.

  • Will pull outlet names from the Wattbox.

  • Can choose which outlets to make available to the user.

  • Will not work on: WB-300, WB-300VB, WB-700, WB-700CH.

For a temporary test license or other question contact us through drivers@digitalautomation.us

Note: Due to the nature of this product, any and all sales are final, and no refund can be issued. It is highly recommended and highly encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor. We reserve the right to make changes to this policy without notice.

Reviews

There are no reviews yet.

Be the first to review “Wattbox Crestron Home™ driver”

Your email address will not be published. Required fields are marked *

Downloads

PowerController_Wattbox_Power-Conditioner_IP-Manual

  • What preparation do I need to do before installing the driver?

    It is recommended that you save a configuration or golden configuration before installing any driver.

  • I made an update to the settings and the driver stopped working

    This is due to a bug in Crestron Home. You have to go back to the driver settings (ie. the gear), go to the Control tab. It should show the IP Address, port, username, and password. What you have to do is force the Apply button to be enabled by making and undoing a change, eg. add a 1 to the end of the username and delete the 1. Once the Apply button is enable, press it. Check the driver.

  • All search results