What preparation do I need to do before installing the driver?

It is recommended that you save a configuration or golden configuration before installing any driver.

I made an update to the settings and the driver stopped working

This is due to a bug in Crestron Home. You have to go back to the driver settings (ie. the gear), go to the Control tab. It should show the IP Address, port, username, and password. What you have to do is force the Apply button to be enabled by making and undoing a change, eg. add a 1 to the end of the username and delete the 1. Once the Apply button is enable, press it. Check the driver.

Wattbox Crestron Home™ driver - Digital Automation

Description

Will control Wattbox series that support telnet.
Current known supported series are: WB-150, WB-250, and WB-800.
Username and password can not contain special characters, only alphanumeric characters.
Will pull outlet names from the Wattbox.
Can choose which outlets to make available to the user.
Will not work on: WB-300, WB-300VB, WB-700, WB-700CH.

For a temporary test license or other question contact us through drivers@digitalautomation.us

Note: Due to the nature of this product, any and all sales are final, and NO refund will be issued. It is highly recommended and encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor.

Before calling, review the Driver help file and FAQ section for the Driver as our support is limited to questions about configuration and setup only. Any hardware configuration mentioned in the driver manual are the responsibility of the integrator. If you have hardware-related questions, such as wiring or addressing, we advise reaching out directly to the manufacturer for assistance. Additional support, beyond driver configuration, requires the purchase of service hours before guidance will be provided.

We reserve the right to make changes to this policy without notice.

Please accept preferences, statistics, marketing cookies to watch this video.

Additional information

License	Wattbox + 1 hour of live support, Wattbox – Driver Only (email support only)

Reviews

There are no reviews yet.

Be the first to review “Wattbox Crestron Home™ driver”

Downloads

PowerController_Wattbox_Power-Conditioner_IP-Manual

What preparation do I need to do before installing the driver?

It is recommended that you save a configuration or golden configuration before installing any driver.
I made an update to the settings and the driver stopped working

This is due to a bug in Crestron Home. You have to go back to the driver settings (ie. the gear), go to the Control tab. It should show the IP Address, port, username, and password. What you have to do is force the Apply button to be enabled by making and undoing a change, eg. add a 1 to the end of the username and delete the 1. Once the Apply button is enable, press it. Check the driver.