What preparation do I need to do before installing the driver?

It is recommended that you save a configuration or golden configuration before installing any driver.

How to enable debug messages out to TX

Brief steps are text console into the processor, do enableprogramcmd, find out the driver ID via ccdinfo. Enable logging by using ccdlogging id on. Than follow up by doing ccdtxdebug id on. This will print the exact text that’s being sent out to the device. Turn it off by doing ccdlogging id off.

Does the driver support controlling devices via IR/232/CEC?

At the moment, the driver doesn’t support controlling other devices connected to the Binary room box. A future update will add this support.

How can I send one physical input to many devices (driver) inputs?

Crestron Home manages input loop-outs using virtual adapters. The adapters are placed in the Crestron Home configuration as a hub between the source and the devices. The physical source is landed on the adapter’s input, and the adapter outputs are landed on the device's input as needed. The most commonly used adapters are the Universal A/V Adapter and the Uncontrolled Generic A/V DA. They are shown under the "Other" category below "Drivers".

Binary MoIP Crestron Home ™ Driver

Description

Supported Features

Input Routing: 50 x 50 AV Switcher
Added Binary endpoint RS-232 COM port communication support

Note: Due to the nature of this product, any and all sales are final, and NO refund will be issued. It is highly recommended and encouraged to use the built-in trial license to test the driver with your hardware setup before purchasing a full license. The trial period is 2 hours and can be extended another 2 hours by rebooting the processor.

Before calling, review the Driver help file and FAQ section for the Driver as our support is limited to questions about configuration and setup only. Any hardware configuration mentioned in the driver manual are the responsibility of the integrator. If you have hardware-related questions, such as wiring or addressing, we advise reaching out directly to the manufacturer for assistance. Additional support, beyond driver configuration, requires the purchase of service hours before guidance will be provided.

We reserve the right to make changes to this policy without notice.

Additional information

License	Binary MoIP + 1 hour of live support, Binary MoIP – Driver Only (email support only)

Reviews

There are no reviews yet.

Be the first to review “Binary MoIP Crestron Home ™ Driver”

Downloads

AVSwitcher_Binary_MoIP_IP-Manual

What preparation do I need to do before installing the driver?

It is recommended that you save a configuration or golden configuration before installing any driver.
How to enable debug messages out to TX

Brief steps are text console into the processor, do enableprogramcmd, find out the driver ID via ccdinfo. Enable logging by using ccdlogging id on. Than follow up by doing ccdtxdebug id on. This will print the exact text that’s being sent out to the device. Turn it off by doing ccdlogging id off.
Does the driver support controlling devices via IR/232/CEC?

At the moment, the driver doesn’t support controlling other devices connected to the Binary room box. A future update will add this support.
How can I send one physical input to many devices (driver) inputs?

Crestron Home manages input loop-outs using virtual adapters. The adapters are placed in the Crestron Home configuration as a hub between the source and the devices. The physical source is landed on the adapter’s input, and the adapter outputs are landed on the device's input as needed. The most commonly used adapters are the Universal A/V Adapter and the Uncontrolled Generic A/V DA. They are shown under the "Other" category below "Drivers".